Plasma Machine Basics by @cahlen on 3Speak
Here are the basics of what you need to know to use a Plasma Machine designed by Christian Amenofis Marino safely and effectively. --- ▶ Watch on 3speak.tv
Tags: #health #technology #future #diy #biohacking #science #life #lifestyle
Hey everyone, Callan here, and in this video, I'm going to go over the basics of how to use a plasma machine. So I've covered a lot of this stuff in my other videos, but it was generally part of videos talking about other things, like where to buy one, how to build one, my own experiences with it, and all that type of stuff, but this video is just going to be showing you how to do it. I get a lot of emails from people who buy machines from other people. and they don't really get instructions on what to do, and there's really not a whole lot out there, so that's what this is going to cover, okay? So, there's really not a whole lot to it if you're just using the bulbs, which is the way of using the machine that most people are familiar with. Now, originally, and actually, preferably, what you're doing is you're using the full tower, which is like four to five feet tall, and kind of expensive and elaborate to make, okay? Amenifice who was the one who designed this machine says that, you know, you can use these simplified machines, which is what the Tesla machine is, which is what pretty much any of these plasma machines nowadays is, but it's nowhere near as powerful as if you actually have the full tower, okay? But if you're going to use the tower, there's a lot of different things you need to know, and we're not going to go into that. Also, you can use the pancake coil, like I showed you a couple of videos, me making a pancake coil. And there are a couple different things you need to know about that. But I'm just going to show you the bulbs today, because that's pretty much what everyone is familiar with. Okay, so these are just CFL bulbs, compact fluorescent lights. They're full of argon gas, and the whole point is just to spread out. the electricity which is coming through this wire, okay? So the electricity, which is coming through this wire, is extremely high volts, thousands of volts, but very low amperage, and it's at a frequency volt amperage combination, which is healthy to the body, but when it's all concentrated in this wire, it is going to feel uncomfortable. to have it go through your body. It may even burn you because all of it's concentrated into a little point, okay? So the point of these, this glass, with the argon inside of it, is to spread out that effect, okay? So you're grabbing it, and that tiny little speck of electricity is going everywhere that your hand is touching, okay? So every part of this bulb where skin is touching it, is another part which the electricity is able to spread across to, okay? So this is one of the most important principles you need to know when using this machine. The more surface area you have, the more comfortable it will be, and also the more of your body it will gain access to. Okay, so if I'm holding it like this, it's going to be comfortable, but if I'm just touching it like this, that's not going to be comfortable, okay? Okay, and kind of related to that, You don't want, it seems like you would just want to hold these right here, okay, or down here, but you do not want to do that, okay? If you do that, there's all these little gaps here, and that concentrated electrical bolt is going to jump across your hand, and you're going to go out, and you're probably going to drop it, okay? Same with down here, because there's little gaps where this thing screws in, where the electricity will come out. So never grab this down here, always be holding the bulb. in your hand. And even when you're applying it to other parts of your body, generally, this isn't always true, but generally you're going to be wanting to hold it in your hand and then apply it to that part of the body. Okay? It'll be going into your hand, and it will be going into that part of the body. It's just getting divided up. Okay, so the next thing that you need to know is that when you're just holding one bulb versus when you're holding two bulbs, there's... two very different things happening in those situations, okay? If you're just holding one, it's like a Tesla coil, and you are only getting the radiative energy. And, you know, that's a little bit complex. You can look it up, radiative energy. When electricity gets excited, stimulated to a certain point, it exits its circuit and becomes something which just propagates itself through space, right? Through the medium. it's not part of a circuit, okay? So if I'm just holding one bulb, I'm only getting that electricity, and it's going to be fairly weak, especially with this machine. If you're in a Tesla coil, you know, like a really big, powerful Tesla coil, you're going to see bolts of lightning coming out of your entire body, right? That's the same thing going on here. But the bolts here are much more, you know, small. Okay, so... You're going to be touching this thing and you're barely even going to see anything go across your hand, and you're barely going to feel anything even if you're just holding one bulb, okay? But if you're holding one bulb and then you grab the other bulb because of the way this machine is wired, you are now part of the circuit, okay? So you are not only getting radiative energy, you're getting energy from the machine, okay? And the machine is pumping energy. through you, it is using your body to get the energy from one bulb to the other. That's what you need to understand. The energy in this bulb wants to get to the energy in this bulb, okay? And it can't, it's hard for it to do it through the air. If you were able to get them close enough, then they would jump across, but generally if they're this far apart, there's no way for them to do that until you touch it. Now you've got water and all kinds of... metal ions and things in your body, which make you highly conductive, and so now the machine is going to use your body to complete the circuit. And it's going to use the path of least resistance, which means the shortest path and also the path that, you know, provides the least resistance. It's an electrical term, but generally you can just think of it as the shortest path, because the resistance in your body is going to be pretty much the same everywhere. So it's going to take the shortest path. So if I'm holding this bulb and I'm holding this bulb, the shortest path is through my arms, through my shoulders, through my chest, into my other arm, and into this other bulb. Okay? So if I'm wanting to treat something in my shoulder, or in my chest, or in my upper back, or in my arms or hands, then just holding like this is going to be really useful. Okay? And this is the standard way to use it. You could get by with just using the machine by just holding it in your hands for, you know, 15 minutes to a half an hour. Okay, but there's lots of other things you can do, and really, you can come up with your own things. You just have to keep in mind, it's going to take the path of least resistance, okay? So what I like to do is I lay in my bed, and I take my socks off, and I hold this bulb. in both of my, with both of my feet, okay? So, one foot on this side, one on foot on this side, trying to get as much surface area as possible, because if only a small part of my foot is touching this bulb, then that small part is taking all of that energy. So if more is pushing against it, all that energy is spread out across more, and it will not feel uncomfortable. And if you have very small part of your skin touching it for a long period time, you probably are going to get burned, okay? So anyways, I hold this with both of my bare feet, and then I will hold this with both of my hands. And that, remember, they're trying to get from one bulb to the other. So it's going to go through both of my legs. It's going to go through my whole hip. It's going to go through my stomach area. It's going to go through my chest. It's basically going to go through my entire body, everything except above the neck. Okay. So I like to, that's how I usually start a session, I just lay down, put a bulb in my feet, and I hold this thing for like 10 or 15 minutes. Okay? Then I will usually just keep the other bulb on my feet, and I will take this bulb, and I'll just start moving around to different parts of my body. It basically depends on what part of your body is giving you trouble, and what are you trying to treat, okay? But... I don't currently have anything very specific that I'm trying to treat. So I will, after holding it with the, in the foot and the hands, I will then start applying the one bulb to my neck, to various parts of my face, to various parts of my scalp. I will even apply it to my eyes, so I will just close my eyes and I will just push it against my eyeball, okay? And I'll make sure I do equal amounts on both sides for everything. I also, I always wear earplugs when I'm doing this because my machine is not enclosed, so all that noise is coming out. But then I will just push it against my ears, okay? And so that's all with it, one on my foot, right? But also, you can just bring it up and do the same thing like this, okay? So now it's not going through your body at all. It's all going through your head, right? And it's perfectly fine to do this. I do this all the time. I've never had any bad effects. I've never heard of anyone having any bad effects, okay? It's just you have to keep in mind that it's going to take the path of least resistance, and you want to have as much surface area touching as possible, or it's going to be uncomfortable. Also, another thing that you need to keep in mind, if you are holding this bulb, and, you know, let's say you had it like this, okay? I'm holding the bulb, so it's going into my fingers, okay? If I touch a part of my skin now, it's going to go through my eyebrow, okay? Because it's going to go through my hand, and then into my eyebrow. It's still going into my cheek, but it's also going to be going into my eyebrow, okay? So that's something that you can use to target specific areas. Your fingers can be used to give you certain points that you're having energy. Go through. But also, sometimes when you're using this, you will accidentally shock yourself, and this is one of the common ways you'll do it because you'll be using the bulb, and then you'll accidentally touch yourself in a spot, which is a shorter distance to the other bulb than the bulb is, right? And so all the energy will take that path instead, and that will be kind of shocking, okay? Again, it's never really like something that's really painful or damaging when stuff like that happens. It's just kind of shocking. It's just like, you know, whoa. you know, and if you're holding the bulbs, you know, if it's strong enough, you might drop the bulbs and you generally don't want to do that, okay? So anyways, that's pretty much all you need to know the basics of using the bulbs. Don't hold it here. When you hold two of them, it's a totally different situation, and you want to have as much surface area as possible that you're touching just to keep it comfortable. Okay, so... Next, I want to show you what I mean. I'm gonna, I can't, I can't run this while I have my halogen light on because I can't, it's too much wattage to run the machine and the light at the same time. So I'm gonna turn off the light, I'm gonna film these bulbs in the dark with the machine on, and I'm gonna show you what happens when I touch one bulb, and then when I touch two bulbs at the same time, just so you understand what I'm talking about. Okay, so you can see how there's a big difference there, and really, you can really feel that there's a big difference there, but that's not something that I can show you, okay? So I'm going to go over a few little things that you also need to know. When you're using this, you're going to have very long cables. You don't want these cables to touch each other, okay? It's not going to hurt anything, but basically it's such high voltage that it can jump across. the two wires. Remember, it wants to get, it wants to connect the circuit, but if it was able to touch here, and the voltage is high enough, it can just connect the circuit through this touching, through these touching cables. And so basically just means you're not going to get as much energy making it to the bulb, which means it's not, not as much energy making it to you, okay? So you need to keep the wires that go to the bulbs from touching each other, and also you want to generally keep them from touching anything, which is conductive, like a piece of metal. or the ground, okay, because those things are also going to suck the energy out of the machine. Okay, so now let's go down, let's actually take a look at the machine. There's a couple other things that I need to show you. So, this is one version of the machine. This is the version I made for myself. I've basically designed most of this to just be as simplistic as an easily understandable as possible. I'll make a video at some point talking about how to make the entire thing. But basically all that you'll need to really worry about is adjusting the spark gap gaps, okay? So you can see there are gaps between these zinc rods, and as the gap, the electricity is sparking across them, it eats away at that zinc, and eventually the gaps will get larger. When they get large, the frequency of the machine will drop. It'll sound like a deeper tone, like a deeper musical note, the wider it gets. Also, the energy will become what I would call heavier. It's like it's getting, it's hitting you harder. And so it becomes less comfortable, the larger the gaps get, okay? So you need to adjust these from time to time. It really depends on how much you're using the machine. You know, it could be a few weeks to a month or two. depending on how much you're using it. But you will need to do this yourself, okay? You're not going to be able to send it back to where it came from and then have them do it. I mean, you could do that, but it would be, this is easy to do. But there is something that you need to know, okay? So these are capacitors. These are like batteries, which charge instantly and discharge instantly, which means their entire contents can get sent through a wire. touch that, then you're going to be on a happy person, okay? And they, if I run this machine, and then I turn off the machine, they are still charged. And if I touch them, if I were to touch, they're in the middle, after having run the machine, I'm going to get the full charge of that capacitor through my fingers, which is not going to kill me. unless, you know, if I touch with one finger to this side and one finger to that side, it might kill me because all that's going to go through my heart, okay? But even if I go like that, I'm going to be unhappy, okay? So basically all of this stuff here, none of this stuff you ever want to touch when it's running, or even when it's off after you've been running it, but you can make it safe to touch by discharging the capacitors, okay? You just need an insulated wire about this... Just need a length. It needs to be something that can reach across your capacitors. This is a, I mean, the spark gaps, this is a small spark gap I've seen. Yours will probably be larger, so you might need a bigger wire. But basically, you want to touch the first one, and then you want to touch the second one. Okay, so I'm going to turn this machine on for a second, and I'll show you what that looks like. Okay. You see that? Okay, sometimes it's, that's about of a medium strength there. It was probably about half charged. Sometimes it'll be quite louder and brighter, and sometimes it will be hardly anything. I also recommend that you keep it here for a little while, okay? I've noticed that sometimes it will discharge, and then if I keep it here, it will discharge a little bit more. I don't know why that's happening, but you don't want to get that second discharge either, okay? Then once you've done that, you're going to need an Allen wrench. and you will just, there's these little bolts here, and you will just loosen them, and then you will move the zinc rods to decrease the gap size, okay? The gap should be about 0.4 millimeters each, okay? Between 0.4 and 0.5, when they get to about 0.5, you're going to want to adjust them back down to 0 .4, and there's little guides that you can buy, like thin pieces of metal. which are exactly the right size, and you just slide them in there to make sure you got the right size. I just eyeball it. It doesn't matter that you're completely exact. This is about the right distance, and this one, and this one, are both getting a little bit close to being too wide. Okay, here's a little bit of a closer look at that. This one is about right, and this one is not, okay? Another thing that you need to know about, is sometimes you'll get little balls of zinc, and this doesn't happen very often to me, but I do have one right now. You can kind of see it there. You see that? There's a little ball of zinc sitting in between the gaps, and this is going to cause the electricity to always jump across in that exact spot, and what you want is the electricity to be jumping around like crazy, okay? So I'm going to show you what this looks like. Okay, so you saw that it was pretty much just jumping across over on this left side, and the other ones were all moving around randomly. So that, that is important, that changes the frequency of the machine when it's just jumping across in that one little spot there, okay? So anyways, you can just use, you know, that little tool I said that has the 0.4 millimeter gap. You can just use that to clean the machine, or just stick something, you know, narrow in here. I'm just trying to stick these wires in to try and get that thing out. Okay, so you saw there that that spark gap was now jumping around randomly, like the other ones after I got that little bowl of zinc out of there. Okay, so that's the basics of how you use it. For those of you wondering, does this thing work? Yes, it definitely works. I built this thing originally because I was skeptical and I wanted to see for myself without having to pay a huge amount of money. So I just figured out how to build it, I built it. And then I did scientific tests, and without a doubt it works, okay? And it works dramatically. And everyone who has done these same tests have seen results, almost all of them dramatically, and only one of them, only, you know, sort of, okay? And you can do this test for yourself. Basically, do as many push-ups as you can until you cannot do another push-up, then hold the bulbs in your hands for five minutes, and then immediately do as many push-ups as you can. And you will do more push-ups in the second set than you did in the first one. which is basically according to science impossible, okay? So you should only be able to do 80% of the first set in your second set. But this machine makes you bypass what we would call normal. Okay? So then the other questions would be, how do you get one of these things? Well, my recommendation is that you just build your own, okay? You can build one for yourself for less than $1,000, okay? And if you do that, then you're going to have the advantage of, if something breaks, then you're going to be able to fix it yourself. Okay? But if you don't want to do that, then you can just buy your own. And of course, many of you are familiar with the Tesla Club. They charge 11 grand to get one of the machines. And you can go that route if you want. The Tesla machine definitely works. But there are other people who make these machines, and these other people, actually, their machines are better than the Tesla machine. They are using better quality parts. And these people actually know what they're doing, and the people at Tesla, the people at Tesla are pretending like they're the ones who made this machine, okay? But actually, Christian Meneffis Marino made this machine. It was an open source project, and it's been out there for people to…