@amazingdrinks: You've been curated by @amazingdrinks! Delegations welcome! Find our community here Curation Trail Posted via HiveSuite
Simplicity of the Plasma Machine by @cahlen on 3Speak
The Plasma Machine is actually a very simple device consisting of only a few parts connected by wire: 12v 15a Power Source, ZVS Driver Board, 29" Flyback, Triple Spark Gap, Capacitors, Black Hole C...
Tags: #health #technology #biohacking #science #future
Hey everyone, Kellen here, and I just got my plasma machine back up and running. Basically, I haven't had this thing running ever since I left where I was. So that's been, I think, close to a month, and maybe even over a month at this point. And really, all I was missing was a couple of parts, but I finally got them and was able to put it together. And now it is running on a battery, okay? So that's a new innovation, which I've kind of up with. I mean, it's not really an innovation. It's pretty basic. But it works for my situation because I don't have anything to plug a power cord into. So having a battery makes it much easier. So anyways, I have everything laid out in front of me, just kind of roughly. It's not put in a box or anything like that. And I just wanted to show you the various parts. just to show you how simple this thing really is. If you're looking at the boxes that people make, which have all the fans and have, you know, the capacitors broken out into three different sets of capacitors and the spark gap, you know, in a box and going in an S curve and all this type of stuff, it looks complicated, but actually, if you arrange it in a certain way, it's quite simple, okay? So all the wires are a little too long, so everything's really spread out in mind, but... you know, I think you'll see that it's actually a very simple arrangement, so let me show you that. Okay, so this is the whole thing, and you can pretty much cut out this whole part right here, these two things. This is the battery, this is an old e-bike battery that charges to 54.6, wait, I can't remember now, I think it's 54.6, it's considered a 48-fold battery, but things always charge more of them what they are labeled as. This is a DC to DC converter, so this converts the high voltage of this to 12 volts and 15 amps, which is exactly what this machine needs. But you can basically just buy, like, basically it looks like a laptop power cord to do everything that you're seeing here, okay? So really, you could get rid of this and just buy one of those for 30 bucks and plug it in here, and it's Prima can do the same thing. So we're really just going to consider... this part as the plasma machine, okay? So this is a ZVS driver. It takes 12 volts, 15 amps. It goes to a flyback. This runs the old type of TVs and basically creates really high voltage. Okay, so this part is what can kill you. So, you know, me having an out like this is kind of dangerous, but I know not to touch anything, and I know to discharge capacitors after I've run it before I touch anything, okay? But anyways, ZVS to a flyback, to a spark gap, which is just three gaps, okay? So there's one gap here, one gap here, and one gap here, of 0.4 millimeters between zinc rods, okay? So there's four zinc rods, 1, 2, 3, 4, and 3 gaps, 0.4 millimeters between them all. This is a pretty simple arrangement. I had an even simpler arrangement, but I wasn't ever able to get the nylon threaded rod. So I just went with this, so this is Plexiglass, okay? Then it goes to the capacitors, and the capacitors are usually broken out into three sections, and this is still in three sections, but I've arranged it in a way, so it's really just looks like it's one, okay? So there's the, the clock capacitor, which is what I call it, basically the timing, and then there's the two larger capacitors on either side, okay? And then that goes to your black hole coil. By the way, apparently people have called this version of the black hole, one of the videos I recently made about this, had some changes, basically an innovation upon Hillbillies design, which puts the wires closer together, not as spread out, because there's two layers of wire, not just one. They're calling that the Callan coil, I've heard, I can't get on the telegram group and actually see for myself. but apparently at least one person has called it that, so that's kind of cool. Anyways, I wanted to point out that I think people were thinking that I left the 6-inch PVC pipe in here. The PVC pipe is not actually part of this, okay? I only used it to wrap the cable, and then I pulled it out, okay? So the tape... The tape is sticky side outward, and then you wrap the cable around it, and that means the non-sticky sides against the PVC, so when you're done, you can just pull the PVC pipe out, okay? Because you really don't need that part, okay? So anyways, this is the black hole, and the black hole just goes to the light bulbs, okay? And the light bulbs are not special. The thing that the light bulbs do is these are filled with argon gas, and that causes the, you know, the electricity is coming through here, it's extremely high voltage, but very low amperage. But if you, it's very concentrated in this little wire, right? So if you were to touch this, it wouldn't hurt you. like you wouldn't be in danger, but it would feel extremely uncomfortable, okay? So this is going to go through here, and then it'll get all spread out in the argon gas, and so that's what you're touching. You're basically diffusing the energy, okay? So people are like, oh, people are crazy, they're touching light bulbs. Well, the light bulb has almost nothing to do with it. This is the machine, okay? So anyways, one more time, ZVS driver, flyback for a 29-inch TV, spark gap with three gaps at 0.4 millimeters, and they should be zinc rods, capacitors, there's three of them, black hole coil, light bulbs. So anyways, that's the plasma machine. Basically, this is the simplest arrangement that I've seen anyone come up with. I would like to actually end up making this even simpler, but in order to get simpler than this, I'm going to have to do things like maybe find a way to replace the ZVS and the flyback for some other device, and maybe finding a way to adapt the black hole coil to be smaller than six inches diameter, but that gets kind of complicated because that starts messing with the actual... harmonics and frequency of the whole machine, which is where the healing effect comes from. So, modifying that means that I really need to find a way to be able to measure everything and make sure that when I change the size, I'm doing things which maintain those harmonics and frequencies, which is pretty advanced. So anyways, I think this is pretty much as simple as it's going to get for now. The nice thing about this is that I would like to... find a way to put this in as small of a container as possible so that, you know, it just doesn't take up much space, it's very light, and if I ever do decide to start selling these things, which is a possibility, you know, if I can't find work around here, you know, it would be nice to have some funds, and, you know, I do know how to make something that would be very valuable to people, and I could, you know, charge way less than pretty much everyone else is charging. So it is something that I'm considering doing. So anyways, I do have one guy actually locally who does want me to build a machine, so I'll probably at least do that one and then see how I feel about it after that. So anyways, probably making videos now that I got this thing up and running, telling you about how to use this thing, because that's one thing that's really kind of lacking. Like, people don't really understand some pretty basic things about it. Like for example, you should pretty much, you only should be touching the glass, you don't touch down here, you're gonna get zapped, you should always be touching the glass, even when you're applying it to a different part of your body, okay, so both hands should be touching, should have one hand on each bulb, and you should apply it to different parts of your body this way, okay? Things like that, things that, you know, I kind of just assume people know, but they don't, okay? So there's a lot of things like that. So I'll probably be making videos about that in the future. So anyways, that's this video. Thanks for watching, and I'll see you guys later.
@amazingdrinks: You've been curated by @amazingdrinks! Delegations welcome! Find our community here Curation Trail Posted via HiveSuite