Tutorial desensamble de alcatel 1 - (pantalla mala, solucion) - JOSUERR29 - [Esp/Eng]

4

  • 32
  • 0
  • 1.947
  • Reply

  • Open in the desktop app ADD TO PLAYLIST

    josuerr29

    Published on Jun 30, 2022
    About :


    TITU.png

    content sources
    - Translation of the text:https://www.deepl.com
    - Separator taken from:Here
    - Photo and video:Picsart pro. YouCut. Samsung Galaxy j6 plus.
    - Source and authorship of the content:Own original:
    - Creation of gift:https://www.canva.com.
    - Intro of the video made by me:Gift creation: https://www.canva.com
    - Music of the video without copyright:soundcloud
    Logo 1Design by https://studio.3espeak.tv
    Logo 2Design by https://hive.blog
    Logo 3Design of geek zone food

    English

    Hello reader friends How are you? It's me again @josuerr29 How are you?

    In this opportunity I bring you an experience I had to repair a team an Alcatel one that came for screen repair.

    It seems that these teams constantly have this problem in mind, that the screen fails them a lot. A week ago I got one with a split screen and back firewood and the customer said it broke by itself, and this also came to me with screen failure the customer said it just got like that, and today I'm going to show you how to disassemble and because the screen was bad.

    When the phone turned on just vibrated could sound that came some things and notifications but the screen gave no signs of life, if we let ourselves be guided by what we saw we could simply say that the team was dead but you had to feel it and hear it to know that if the team turned on, it is good to investigate our teams well.

    Through all this and all the things I could do I was given the task of disassembling it and find what was the fault of why the equipment in question did not turn on. in this video I'll show you how to disassemble it and how I could find the fault.

    To disassemble the only things we need are an antistatic bracelet to avoid damaging the board, the screwdrivers, one number 5 iron and one steel, in addition to this an x-ray paddle This is to separate the bezel of the equipment, and a voltage clamp for mobile equipment.

    For the disassembly we will do it in the following way:
    Little by little with the steel screwdriver we have to go lifting and turning each screw of the casing are approximately 8 screws, when we have given a turn to each one Now we grab the iron screwdriver to finish removing them this is done for the reason that we do not want to damage or isolate any screw and not have to use other tools to remove it and also take care of the health of the equipment, after we have done this work we have to go by lifting the entire housing with extreme care not to damage the Flex power button or volume or touch any type of camera Flex without much pressure because if our spatulas go through the plastic of the housing can pierce the Flex. After lifting the casing we observe all the skeletons of the equipment and observe the plate at this time we have to go lifting all the Flex this flex are those of touch screen and cameras, after having done so we can separate the plate of the equipment and there we would already have it free to work with it is the fault that we have.

    My diagnosis of the failure of the equipment is that it has a problem in the track of the screen flex and this is the reason that the screen does not turn on. In the last seconds of the video I show you the track that is damaged and that is the only fault of this equipment and that is why the screen does not turn on soon I will proceed to repair it Thank you very much for watching this video.


    Español

    Hola amigos lectores Qué tal Soy yo de nuevo @josuerr29 Qué tal cómo están.

    En esta oportunidad Les traigo una vivencia que tuve para reparar un equipo un Alcatel uno que vino para reparación de pantalla.

    Parece que estos equipos tienen constante mente este problema, que la pantalla les falla mucho. Hace una semana me llegó uno con la pantalla partida y vuelta leña y el cliente dijo que se partió sola, y este me llegó también con falla de pantalla el cliente comento que solo se puso así, y hoy les voy a Mostrar Cómo se desarma y porque estaba la pantalla mala.

    Cuando el teléfono encendía simplemente vibraba podía sonar que llegaban algunas cosas y notificaciones pero la pantalla no daba señales de vida, si nos dejamos guiar por lo que veíamos simplemente podríamos decir que estaba muerto el equipo pero había que sentirlo y escucharlo para saber que si prendía el equipo, es bueno investigar bien nuestros equipos.

    A través de todo esto y de todas las cosas que pude realizar me di a la tarea de desarmarlo y buscar cuál era la falla de por que el equipo en cuestión no encendía. en este vídeo Te voy a enseñar como desarmarlo Y cómo pude encontrar la falla.

    Para desarmarlo las únicas cosas que necesitamos son una pulsera antiestática para no dañar la placa, los destornilladores de estría uno número 5 de hierro y otro de acero, adicionalmente esto una paleta de rayos x Esto es para separar el bisel del equipo, y una pinza de tensión para equipos móviles.

    Para el desarme lo realizaremos de la siguiente manera:
    Poco a poco con el destornillador de acero tenemos que ir levantando y dándole vuelta a cada tornillo de la carcasa son aproximadamente 8 tornillos, cuando le hayamos dado una vuelta a cada uno Ahora sí agarramos el destornillador de hierro para terminar de sacarlos esto se hace por la razón de que no queremos dañar ni aislar ningún tornillo y no tener que usar de otras herramientas para sacarlo y además cuidar la salud del equipo, luego de que hayamos realizado este trabajo tenemos que ir levantando toda la carcasa con sumo cuidado de no dañar el Flex de botón de encendido ni de volumen ni tocar cámara ningún tipo de Flex sin hacer mucha presión Porque si nuestras espátulas atraviesan el plástico de la carcasa pueden perforar el Flex. Luego de levantar la carcasa observamos todos los esqueletos del equipo y observamos la placa en este momento tenemos que ir levantando todos los Flex esto flex son los de pantalla de táctil y de las cámaras, luego de haberlo hecho podemos separar la placa del equipo y allí ya la tendríamos libre para trabajar con ella sea la falla que tengamos.

    Mi diagnóstico visor de la falla del equipo es que el tiene un problema en la pista del Flex de pantalla y es por esta la razón de que la pantalla no prende. En los últimos segundos del vídeo le muestro la pista que está dañada y partida solo eso queridos amigos es la falla de este equipo por esto no prende la pantalla pronto procederé a su reparación Muchas gracias por ver este vídeo.

    fuentes del contenido
    - Traducción del texto:https://www.deepl.com
    - Separador tomado de:Aqui
    - Foto y video:Picsart pro. YouCut. Samsung Galaxy j6 plus.
    - Fuentem autoría del contenido:original propio
    - Creación de gift:https://www.canva.com.
    - Intro del video realizada por mi:Creación de gift: https://www.canva.com
    - Musica del video Sin derecho de autor:soundcloud
    Logo 1Diseño de https://studio.3espeak.tv
    logo 2Diseño de https://hive.blog
    Logo 3Diseño de la cominida de geek zone

    FUkUE5bzkAZT3HzV5tJDiU2ik81PCd4JCyhWnRcDN8XJsVFY3UNB8DCUemLnQEZEeADjVAdf8Z8maUfpDrh6asa4EGhWHae9vSiobbCkyNHCP6fu7veDbC9RajFzQys3FEZ3F9mDVsaxMxKvFzXjpyW7hGqzbuesRUtE.png

    @josuerr29.gif


    Tags :

    tech spanish technology tecnologia tutorial geek smatphone geekzoone desassembly lcd system connection phone electronics movil solution diagnostic repair venezuela star fail power portofloading alcatel

    Woo! This creator can upvote comments using 3speak's stake today because they are a top performing creator! Leave a quality comment relating to their content and you could receive an upvote worth at least a dollar.

    Their limit for today is $0!
    Comments:
    Time until josuerr29 can give away $0 to their commenters.
    0 Days 0 Hours 0 Minutes 0 Seconds
    Reply:

    To comment on this video please connect a HIVE account to your profile: Connect HIVE Account

    More Videos

    05:04
    11 views a year ago $