Tutorial: Como optimizar tu pc/laptops en menos de 6min

4

  • 69
  • 1
  • 1.113
  • Reply

  • Open in the desktop app ADD TO PLAYLIST

    deihive

    Published on Apr 19, 2022
    About :

    En esta ocasión, develaré el secreto que ningún técnico en computación desearía que supieras, así mismo como lo lees, porque se que lo necesitas lo traje para ti, se trata de Optimizar una pc de escritorio/laptops sin necesidad de formateo, iremos de la mano en este proceso, les traigo esta información para que sea de provecho para ustedes y tengan un equipo mas rápido, por lo tanto como resultado sea mas eficaz y eficiente a la hora de realizar tus trabajos, esto te lo explicare en 4 pasos.

    On this occasion, I will reveal the secret that no computer technician would want you to know, just as you read it, because I know you need it, I brought it for you, it is about Optimizing a desktop PC/laptops without the need for formatting, we will go hand in hand in this process, I bring you this information so that it is of benefit to you and you have a faster team, therefore as a result it is more effective and efficient when carrying out your work, I will explain this to you in 4 steps .

    pc.jpg

    Paso nº 1

    Step #1

    image_0.png

    Una vez presionadas abriràs la ventana de (ejecutar), posteriormente vamos a escribir lo siguiente: msconfig y pulsamos enter, o presionamos en aceptar.
    vamos a la (opcion de arranque) --> (tiempo de espera),este sera el tiempo aproximado que tardarà tu pc para arrancar una vez la encendemos, cambiamos de 30 seg que viene por defecto a 3 seg para que arranque mas rapido, presionamos en el boton en el extremo inferior derecho (aplicar).
    Vamos a opciones avanzadas, en (numero de procesadores) eliminamos la restriccion que trae por defecto, como notan en mi pc existen 2 procesadores de fabrica y solo estaba trabajando con 1, colocamos el maximo de procesadores de tu pc, para mejor rendimiento, luego presionamos aplicar, aceptar y reiniciamos para guardar los cambios y estos tengan efecto en nuestro equipo.

    Once pressed you will open the (run) window, then we will write the following: msconfig and press enter, or press accept.
    we go to the (boot option) --> (timeout), this will be the approximate time it will take for your pc to boot once we turn it on, we change from 30 seconds that comes by default to 3 seconds to boot faster, Click on the button in the lower right corner (apply).
    We go to advanced options, in (number of processors) we eliminate the restriction that comes by default, as you notice in my pc there are 2 factory processors and I was only working with 1, we put the maximum number of processors of your pc, for better performance, then We press apply, accept and restart to save the changes and they take effect on our computer.

    Paso nº 2

    Step #2

    Vamos a (inicio) --> (equipo) le damos (click derecho) y presionamos la opcion de (propiedades) -->(configuracion avanazada del sistema) --> (configuracion), en la apariencia de tu windows, estaran muchos efectos visuales marcados, para que tenga mejor apariencia tu pc, en este caso tenemos 3 opciones, (a gusto del propietario), podemos dejar la opcion (ajustar para mejor apariencia) que dejaremos activo en esta opcion todos los efectos visuales, podemos personalizarlo (dejando los efectos visuales de nuestra preferencia) o podemos presionar en (ajustar para mejor rendimiento), esta opcion hara que al utilizar tu equipo consuma menos memoria ram al momento de ejectuar tus distintas tareas, puesto qe no habran tantos efectos visuales marcados que solo consumen memoria ram, por ende la pc trabajarà de una forma mas rapida.

    We go to (start) --> (computer) we give it (right click) and press the option of (properties) --> (advanced system configuration) --> (configuration), in the appearance of your windows, there will be many marked visual effects, so that your pc has a better appearance, in this case we have 3 options, (at the owner's taste), we can leave the option (adjust for better appearance) that we will leave all the visual effects active in this option, we can customize it ( leaving the visual effects of our preference) or we can press on (adjust for better performance), this option will make your computer consume less ram memory when executing your different tasks, since there will not be so many marked visual effects that only consume ram memory, therefore the pc will work faster.

    Una vez hecho esto vamos a (opciones avanzadas) --> (cambiar) --> memoria virtual, pulsamos en (tamaño personalizado) y no haremos mas que cambiar los valores por defecto, al maximo recomendado, segun el equipo y la memoria fisica instalada esto va a variar. una vez asignado el valor presionamos (establecer) y posteriormente en (aceptar), de este modo estariamos ampliando lo que seria la capacidad de tu memoria virtual.

    Once this is done, we go to (advanced options) --> (change) --> virtual memory, click on (custom size) and we will do nothing more than change the default values, to the maximum recommended, according to the equipment and the physical memory installed this will vary. Once the value is assigned, we press (establish) and then (accept), in this way we would be expanding what would be the capacity of your virtual memory.

    Paso nº 3

    Step #3

    En este paso nos encargaremos de pausar los procesos que nuestra pc esta ejecutando en segundo plano, que tambien consumen memoria, por lo que hacen que nuestra pc se vuelva un poco mas lenta, para esto presionamos nuevamente.

    In this step we will take care of pausing the processes that our PC is running in the background, which also consume memory, so they make our PC a little slower, for this we press again.

    windowsr.png

    En ejecutar colocamos el siguiente comando: regedit y continuamos con la siguiente ruta-->Hkeylocal_machine-->system-->current control set-->session manager--> subsystem-->en la opcion de windows presionamos doble click y buscamos los valores de memoria, por lo general vienen expresados de la siguiente manera (1024,12288 y por lo general viene un valor bajo luego de estos 2 valores, lo borramos y lo ajustamos a 1024) de esta forma estariamos usando el maximo permitido de nuestra memoria ram.

    In execute we place the following command: regedit and continue with the following route-->Hkeylocal_machine-->system-->current control set-->session manager--> subsystem-->in the windows option we press double click and look for memory values ​​are usually expressed as follows (1024,12288 and usually a low value comes after these 2 values, we delete it and adjust it to 1024) in this way we would be using the maximum allowed of our RAM.

    Una vez hecho esto vamos a Memory management -->Disablepagingexecutive-->cambiamos el valor por defecto y colocamos (1), luego -->largesystemcache repetimos esta accion y cambiamos el valor que traiga por defecto a (1), luego (edicion) --> (buscar) y colocamos (menushowdelay) cambiamos el valor a (1) y presionamos en aceptar, de esta forma estariamos pausando todo proceso que se encuentre ejecutando en segundo plano. luego reiniciamos para que los cambios surjan efecto.

    Once this is done we go to Memory management -->Disablepagingexecutive-->we change the default value and put (1), then -->largesystemcache we repeat this action and change the default value to (1), then (edit ) --> (search) and place (menushowdelay) change the value to (1) and press accept, in this way we would be pausing any process that is running in the background. Then we restart for the changes to take effect.

    Paso nº 4:

    Step #4:

    windowsr.png

    En ejecutar colocamos los siguientes comandos:
    temp y presionamos en aceptar o enter -->subrayamos todos los archivos basura que se desplieguen --> click derecho eliminar, vamos a repetir este proceso con los otros 2 comandos que le dejare a continuacion, que seran %temp% y por ultimo prefetch.

    In execute we place the following commands:
    temp and press accept or enter --> underline all the junk files that are displayed --> right click delete, we are going to repeat this process with the other 2 commands that I will leave below, which will be %temp% and finally prefetch .

    Luego vamos a (inicio), en la barra buscadora colocamos: (visor de eventos), esperamos a que todos los eventos sean cargados, vamos a (registro de windows), y borraremos todos los registros con (click derecho)--> (vaciar registro) --> (borrar). reiniciamos y listo, les aconsejo repetir este paso numero 4 (solo el paso nº 4) por lo menos 1 vez a la semana, asi mantemos nuestra pc libre de archivos basura.

    Then we go to (start), in the search bar we place: (event viewer), we wait for all the events to be loaded, we go to (windows registry), and we will delete all the registries with (right click)--> ( empty log) --> (delete). We restart and that's it, I advise you to repeat this step number 4 (only step number 4) at least once a week, so we keep our PC free of junk files.

    El video es de mi autoria realizado desde mi computadora, con el programa GOM Cam.

    La imagen fue extraida de Google

    Texto traducido en Google Traslate

    The video is my own, made from my computer, with the GOM Cam program.
    The image was pulled from Google

    Translated text in Google Translate

    Tags :

    geek zone neoxian spanish gamer appreciator hivevenezuela tutorial ocdb palnet gaming

    Woo! This creator can upvote comments using 3speak's stake today because they are a top performing creator! Leave a quality comment relating to their content and you could receive an upvote worth at least a dollar.

    Their limit for today is $0!
    Comments:
    Time until deihive can give away $0 to their commenters.
    0 Days 0 Hours 0 Minutes 0 Seconds
    Reply:

    To comment on this video please connect a HIVE account to your profile: Connect HIVE Account

    deihive has no more videos yet.

    More Videos

    02:08
    0 views 2 years ago $
    00:27
    3 views a year ago $
    04:43
    17 views 6 months ago $